Home>Products>IKO Bearing>IKO NART12R Cam Follower and Track Roller - Yoke Type
IKO NART12R MODELS
Need a CAD or 3D Model?
IKO NART12R Cam Follower and Track Roller - Yoke Type
IKO Bearing
IKO NART12R Bearing SPECIFICATIONS
With over 10170 full-service stores, our IKO NART12R Cam Follower and Track Roller - Yoke Type inventory is extensive and 330 Material constant KM 104 mm d2 max. our parts are priced right. within 24 hours. This helps you maximize 32 mm B your BEARING PRECISION AXLE CORP. productivity by saving time and your hard-earned dollars.
- IKO
NART12R
- 330
- 32 mm
- 104 mm
- 55 mm
- 127 kN
- 45 mm
- 224 kN
- 30 mm
-
BEARING PRECISION AXLE CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
IKO NART12R Cam Follower and Track Roller - Yoke Type Codes and sizes
- 330
- 32 mm
- 104 mm
- 55 mm
- 127 kN
- 45 mm
- 224 kN
- 30 mm
- 165 mm
- 60 mm
IKO NART12R IKO NART12R Cam Follower and Track Roller - Yoke Type specification
No. | Brand | b | M | a | L | h | H | N | J |
CF20-1V | IKO | - | - | - | - | - | - | - | - |
CR10BR | IKO | - | - | - | - | - | - | - | - |
CF20-1VUU | IKO | - | - | - | - | - | - | - | - |
RNA496 | IKO | - | - | - | - | - | - | - | - |
NAX7040 | IKO | - | - | - | - | - | - | - | - |
LRT19021050 | IKO | - | - | - | - | - | - | - | - |
LRTZ657226 | IKO | - | - | - | - | - | - | - | - |
TLA1612Z | IKO | - | - | - | - | - | 140 mm | - | - |
CFE 20-1 | IKO | - | - | 18.5 mm | - | - | - | - | - |
NURT30 | IKO | - | - | - | - | - | - | - | - |
CRY40VUUR | IKO | - | - | - | - | - | - | - | - |
BAM128 | IKO | - | - | - | 539.75 mm | - | - | - | - |
CR24VBUUR | IKO | - | - | - | - | - | - | - | - |
PB20 | IKO | - | - | - | - | - | - | - | - |
CF30-2V | IKO | - | - | 13.702 mm | - | - | - | - | - |
LRT758535 | IKO | - | - | - | - | - | - | - | - |
CR36VBUU | IKO | - | - | - | - | - | 160.338 mm | - | - |
BA168ZOH | IKO | - | - | - | - | - | - | - | - |
AZK7511011 | IKO | - | - | - | - | - | - | - | - |
CFRU1-6 | IKO | - | - | - | - | - | - | - | - |
CF18V | IKO | - | - | - | - | - | 287.337 mm | - | - |
CFRU1-12-1 | IKO | - | - | - | - | - | - | - | - |
KT526024 | IKO | - | - | - | - | - | - | - | - |
LRTZ172225 | IKO | - | - | - | - | - | - | - | - |
LRT708060 | IKO | - | - | - | - | - | - | - | - |
CFSFU-20 | IKO | - | - | - | - | - | - | - | - |
BHAM1110 | IKO | - | - | - | - | - | - | - | - |
RNA4903 | IKO | 22.3 mm | - | - | - | - | - | - | - |
LRT14015535 | IKO | - | - | - | - | - | 377.825 mm | - | - |
IKO NART30R Cam Follower and Track Roller - Yoke Type | d:30.000 mm; Oil Speed Rating Open/Shielded n2:9500 rpm; Basic Static Radial Load Rating Co:20800 N; Basic Dynamic Radial Load Rating C:29200 N; Accessories:Two Shields & Snap-R; D:72.0000 mm; Grease Speed Rating Open/Shielded n1:7800 rpm; Fillet Radius ra:1.00 mm; B:19.00 mm; |
IKO CR24VBUUR Cam Follower and Track Roller - Stud Type | α:6 °; d4 ≈:42 mm; d2 max.:75 mm; Specific dynamic load factor K:300 N/mm²; dk:40.7 mm; l7 min.:36 mm; d:30 mm; G:M 30x2; l4 max.:149 mm; h1:110 mm; |
1.125 Inch | 28.575 Millimeter x 1.375 Inch | 34.925 Millimeter x 0.5 Inch | 12.7 Millimeter IKO YB188/MF3 Needle Non Thrust Roller Bearings | B:20.00 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:57000 N; Accessories:Two Shields; d:150.000 mm; D:190.0000 mm; Basic Dynamic Radial Load Rating C:48800 N; Sealed Speed Rating n3:0 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; Size (mm):1.125 Inch | 28.575 Millimeter x 1.375 Inch | 34.925 Millimeter x 0.5 Inch | 12.7 Millimeter ; |
2.953 Inch | 75 Millimeter x 3.346 Inch | 85 Millimeter x 1.378 Inch | 35 Millimeter IKO LRT758535 Needle Non Thrust Roller Bearings | Grease:2080 kN; with cylindrical bore:630 min-1; rs (min):3 mm; D:300 mm; with tapered bore:800 min-1; Static (Cor):11.1 mm; Oil:195.070 kN; B:118 mm; Dynamic (Cr):6 mm; Pu:1220 kN; Size (mm):2.953 Inch | 75 Millimeter x 3.346 Inch | 85 Millimeter x 1.378 Inch | 35 Millimeter ; |
IKO NAST17ZZR Cam Follower and Track Roller - Yoke Type | H:99 mm; Mass bearing unit:1.8 kg; Thread grub screw G2:M6; Bearing:YSPAG 208; J7:17 mm; Housing material:Cast iron; N:24.5 mm; Recommended diameter for attachment bolts, mm G:12 mm; J:135.5 mm; Recommended diameter for attachment bolts, inch G:0.5 in; |
IKO NAST45ZZUUR Cam Follower and Track Roller - Yoke Type | L:187.325 mm; H1:53.975 mm; Attachment bolt diameter G:12.7 mm; A:58.737 mm; H2:33.337 mm; s:29.766 mm; S:0.794 mm; Basic dynamic load rating C:102 kN; J min.:131.762 mm; J max.:152.4 mm; |
1.102 Inch | 28 Millimeter x 1.339 Inch | 34 Millimeter x 0.669 Inch | 17 Millimeter IKO KT283417 Needle Non Thrust Roller Bearings | P90°:45.4 kN; End plug (suffix Y):EPR 7; RG:1/4 NPT; P150°:25.4 kN; Max. speed for PosiTrac Plus seal:2350 r/min; Adapter sleeve assembly:SNW 15x2.7/16; Labyrinth ring:2 x LOR 37; Cap bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:0.625 in; Mass pillow block:13.1 kg; Size (mm):1.102 Inch | 28 Millimeter x 1.339 Inch | 34 Millimeter x 0.669 Inch | 17 Millimeter ; |
IKO CFE20-1BUU Cam Follower and Track Roller - Stud Type | Accessories:Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:83200 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Oil Speed Rating n2:5000 rpm; Grease Speed Rating Open/Shielded n1:4300 rpm; D:150.0000 mm; Basic Static Radial Load Rating Co:64000 N; B:28.00 mm; Grease Speed Rating n1:4300 rpm; |
0.787 Inch | 20 Millimeter x 1.063 Inch | 27 Millimeter x 1.181 Inch | 30 Millimeter IKO TA2030Z Needle Non Thrust Roller Bearings | Db2:112 mm; N4:4 mm; J:105 mm; Housing:FY 509 M/VZ033; L:137 mm; RG:1/4-28 UNF; Fatigue load limit Pu:0.915 kN; Housing material:Cast iron; B1:56.3 mm; Recommended tightening torque for grub screw:16.5 N·m; Size (mm):0.787 Inch | 20 Millimeter x 1.063 Inch | 27 Millimeter x 1.181 Inch | 30 Millimeter ; |
0.315 Inch | 8 Millimeter x 0.591 Inch | 15 Millimeter x 0.394 Inch | 10 Millimeter IKO RNA496 Needle Non Thrust Roller Bearings | Minimum load factor A:55; Basic dynamic load rating C:475 kN; Limiting speed:800 r/min; d1 ≈:666 mm; d:560 mm; D:670 mm; ra max.:2.5 mm; D1 ≈:564 mm; da min.:623 mm; Da max.:607 mm; Size (mm):0.315 Inch | 8 Millimeter x 0.591 Inch | 15 Millimeter x 0.394 Inch | 10 Millimeter ; |
0.5 Inch | 12.7 Millimeter x 0.75 Inch | 19.05 Millimeter x 0.5 Inch | 12.7 Millimeter IKO BHAM88 Needle Non Thrust Roller Bearings | Preload:1000 lb; Keyway e:70.9 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating Max. n2:250 rpm; D:120.7000 mm; Oil Mist Speed Rating Max. n3:250 rpm; B:57.15 mm; Grease Speed Rating Max. n1:250 rpm; Keyway f:4.7 mm; X-L-O Part Number:155-07; Size (mm):0.5 Inch | 12.7 Millimeter x 0.75 Inch | 19.05 Millimeter x 0.5 Inch | 12.7 Millimeter ; |
IKO CRH44VBUUR Cam Follower and Track Roller - Stud Type | B:35 mm; d2 max.:114 mm; Mass rod end:3.9 kg; C1 max.:31 mm; Material constant KM:330; G:M 52x3; l1 min.:110 mm; Basic static load rating C0:245 kN; Specific dynamic load factor K:100 N/mm²; α:6 °; |
2.559 Inch | 65 Millimeter x 3.228 Inch | 82 Millimeter x 0.984 Inch | 25 Millimeter IKO RNA49/58 Needle Non Thrust Roller Bearings | PG:1/8 NPT; RG:1/8 NPT; P60°:42.3 kN; Lock washer:W 12; Appropriate attachment bolt size G:0.5 in; Cap bolt:2 x 1/2-13 UNC; J min.:219.075 mm; Bearing:22312 E; N1:15.875 mm; Lock nut:N 12; Size (mm):2.559 Inch | 65 Millimeter x 3.228 Inch | 82 Millimeter x 0.984 Inch | 25 Millimeter ; |
9.449 Inch | 240 Millimeter x 10.433 Inch | 265 Millimeter x 2.362 Inch | 60 Millimeter IKO LRT24026560 Needle Non Thrust Roller Bearings | B1:259 mm; Da min.:507 mm; da max.:464 mm; Misalignment factor k1:0.117; ra max.:4 mm; Da max.:580 mm; Ba min.:14 mm; s1 max.:27.9 mm; Mass bearing + sleeve:250 kg; Ca min.:3.9 mm; Size (mm):9.449 Inch | 240 Millimeter x 10.433 Inch | 265 Millimeter x 2.362 Inch | 60 Millimeter ; |
IKO CR14B Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:19300 N; Oil Speed Rating Open/Shielded n2:11000 rpm; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; d:25.000 mm; Basic Dynamic Radial Load Rating C:35800 N; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:6400 rpm; D:80.0000 mm; B:21.00 mm; |
0.315 Inch | 8 Millimeter x 0.394 Inch | 10 Millimeter x 0.433 Inch | 11 Millimeter IKO LRT81011 Needle Non Thrust Roller Bearings | Grease:5 600 min-1; D1:19 mm; Pu:1.210 kN; Oil:7 500 min-1; D:35 mm; H:12 mm; d:17 mm; rs (min):0.6 mm; dynamic Cr:17.820 kN; static Cor:26.600 kN; Size (mm):0.315 Inch | 8 Millimeter x 0.394 Inch | 10 Millimeter x 0.433 Inch | 11 Millimeter ; |
IKO NART12R Cam Follower and Track Roller - Yoke Type Video
IKO NART12R INTERCHANGE
IKO Bearing Part series NART12R is a potential replacement for these common bearing part numbers:
NART12R
NART12R
NART12R
NART12R
NART12R
NART12R
NART12R
NART12R
Contact Us

- BEARING PRECISION AXLE CORP.
- Address795 Kimberly Drive, Carol Stream, Illinois U.S.A.
- Phone(Working Time)690-6329
- Fax
IKO NART12R Technical Articles
NBC BEARING PRICE LIST NEW |
BEARING PULLER PRICE LIST |
PLUMMER BLOCK PRICE LIST |
IKO Bearing CATEGORIES
- AMI BEARING
- AURORA BEARING
- FAG Bearing
- IKO Bearing
- INA Bearing
- KOYO Bearing
- NACHI Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- Timken Bearing
- 608v Bearing
- Fag C3 Bearing
- NSK As2 Bearing
- 40bwd06 Bearing
- Bearing Slewing Ring
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Super Precision Bearing
- Super Precision Angular Contact Bearings
- Super Precision Bearings
- Slewing Ring
- Tapered Roller Bearing
- Cylindrical Roller Bearing
- Thrust Spherical Roller Bearing
- Thrust Roller Bearing
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
- K040317sf Belts
- Toyota Fan Belt
- Gates 30g3750
- Gates G Force Belt
- K080830 Belts
Customers Who Viewed IKO NART12R Bearing Also Viewed
IKO CR14B Cam Follower and Track Roller - Stud Type
IKO AZK7511011 Thrust Roller Bearing
IKO WS3562 Thrust Roller Bearing
IKO CR10BR Cam Follower and Track Roller - Stud Type
2.559 Inch | 65 Millimeter x 3.228 Inch | 82 Millimeter x 0.984 Inch | 25 Millimeter IKO RNA49/58 Needle Non Thrust Roller Bearings