NSK 11204TN Self Aligning Ball Bearings

Y0:0.82; B:33.34 mm; Fatigue limit load, Cu:28 kN; Dynamic load, C:153 kN; EAN:4547359534207; Weight / Kilogram:0; Brand:NTN; d1:108 mm; Characteristic outer ring frequency, BPF0:10.74 Hz; Y2:1.48;

H:30.2 mm; Recommended tightening torque for set screw:5.5 Nm; B:21.4 mm; A1:22 mm; Designation of bearing:ES204G2T20; H1:11 mm; Designation of housing:PA204N-; E:13 mm; Designation of open end cover:SCOE204-20; d1:32.4 mm;

T min.:-20 °C; e:19 mm; s1:21.45 mm; S:17.5 mm; Weight:1.29 kg; Designation of housing:FL207N-; Designation of closed end cover:SCC207; A1:14 mm; Dz:80 mm; Z:48.7 mm;

L1:62 mm; N1:25 mm; T max.:100 °C; B:49.2 mm; H1:20 mm; H:105 mm; A1:36 mm; H2:157 mm; Weight:3.1 kg; Designation of housing:PH209-;

C:20 mm; Lubrication hole on inner ring:Non/No; Characteristic inner ring frequency, BPFI:6.33 Hz; F:14 mm; Min operating temperature, Tmin:-20 °C; Lubrication hole on outer ring:Non/No; Da max:20 mm; Nlim (grease):16,000 rpm; Characteristic rolling element frequency, BSF:6.45 Hz; d:10 mm;

Designation of open end cover:SCO207-35; T min.:-20 °C; L:129 mm; N:22mm; Weight:1.57 kg; s1:16 mm; G:M6x1; P:230 mm; Recommended tightening torque for set screw:5.5 Nm; L1:78 mm;

Weight:2.43 kg; C0:20.8 kN; A:54 mm; B:30.2 mm; N1:23 mm; Designation of bearing:ES209-28G2; C:31.85 kN; N:17mm; A1:37 mm; G:M6x1;

T max.:100 °C; N:15mm; H:190 mm; T min.:-40 °C; G:M6x1; L:115 mm; C:35.1 kN; L1:94 mm; A:40 mm; C0:23.2 kN;

s1:15.5 mm; J:78 mm; A4:20.5 mm; S:12.7 mm; e:10 mm; A2:28.3 mm; B:31 mm; L:100 mm; Weight:0.71 kg; Designation of bearing:UC201G2L3;

N:13mm; T max.:100 °C; Designation of housing:P205-; Recommended tightening torque for set screw:3.7 Nm; J:105 mm; H:36.5 mm; H1:16 mm; T min.:-20 °C; s1:17 mm; C:14 kN;

A:34 mm; J:92 mm; G:M6x1; A2:51.3 mm; B:37.6 mm; A1:15 mm; T min.:-20 °C; Designation of housing:F207-; Recommended tightening torque for set screw:8 Nm; C0:15.2 kN;

A:53.5 mm; G:R1/8"; Z:48.5 mm; A2:72.8 mm; s1:26.85 mm; Weight:4.52 kg; B:53.7 mm; L:175 mm; J:143 mm; e:34 mm;

B:21.4 mm; T min.:-40 °C; m:5 mm; S:7.5 mm; C1:4.3 mm; B2:13.5 mm; SW:3.18 mm; C:15 mm; B1:30.9 mm; d:23.81 mm;

Special Coating:STANDARD PAINT; Brand:Baldor-Dodge; Screw Diameter:0.7500 in; Take-Up Frame Travel:12.0000 in; Frame Size:10; Screw Treatment:ZINC PLATED; Take-Up Frame Style:TOP ANGLE; UPC:782475018697; Material Type:CARBON STEEL; Angle Size:2-1/2 X 2-1/2 X 5/16;

Max operating temperature, Tmax:165 °C; d:30 mm; Da max:57 mm; Characteristic outer ring frequency, BPF0:3.58 Hz; Characteristic inner ring frequency, BPFI:5.42 Hz; D:62 mm; rs min:1 mm; Nlim (grease):7,300 rpm; Dynamic load, C:19.5 kN; da min:35 mm;